The RCA RCR503BE is a compact 3-device universal remote perfect for simplifying control of your essential entertainment devices, such as a TV, DVD player, and VCR or satellite box. Its straightforward layout makes it easy to use. This guide contains the specific codes and step-by-step instructions to get your RCR503BE programmed and working fast.
RCA RCR503BE Remote Codes List
Find your device’s brand in the list below. Start with the first code. If it doesn’t work, try the next one on the list until your device responds.
Find Your RCA RCR503BE Remote Control Codes
Programming Your RCA RCR503BE Universal Remote
Method 1: Direct Code Entry (Recommended)
- Turn on your device (e.g., TV, DVD player).
- Press and hold the corresponding device button on the remote (TV, DVD, VCR/SAT).
- While holding the device button, press and hold the POWER button until the indicator light turns on. Release both buttons. The light will remain on.
- Enter the first 5-digit code for your brand from the list above. The indicator light will turn off after the last digit is entered.
- Test the remote. Point it at your device and press POWER. If the device turns off, the programming is complete. If not, repeat the steps using the next code for your brand.
Method 2: Auto Code Search (If Codes Don’t Work)
- Turn on your device.
- Press and hold the device button you want to program.
- While holding it, press and hold the POWER button until the indicator light turns on. Release both.
- Press the PLAY button on the remote. The remote will begin sending codes to your device, and the indicator light will blink.
- Wait for your device to turn off. As soon as it does, immediately press the REVERSE button once to lock in the code.
- Test the remote by powering the device back on and trying other functions.
Troubleshooting Common Issues with RCA RCR503BE Remote
- Indicator light blinks but nothing happens? This means you have entered an invalid code. Double-check the code from the list or use the Auto Code Search.
- Remote seems dead? Your batteries are likely the issue. Replace them with a fresh pair and ensure they are inserted correctly.
- Why do only the POWER and Volume buttons work? The remote has found a partial code match. You must repeat the Auto Code Search process to find a more compatible code.
Frequently Asked Questions (FAQs) about RCA RCR503BE Remote
The RCR503BE is a 3-device remote. It is designed to control up to three separate components, such as a TV, a DVD player, and a VCR or satellite box.
Absolutely. Its 3-device capacity and simple design make it ideal for basic setups where you only need to control a TV and one or two other components.
The model number (RCR503BE) is typically printed on a sticker located inside the battery compartment or on the back of the remote’s casing.
Conclusion
Programming your RCA RCR503BE is that simple. This 3-device remote is the perfect tool for decluttering your coffee table and streamlining control over your essential devices. By following the steps above, you’ve successfully synced your remote and are ready to enjoy a more organized and hassle-free entertainment experience.
Add Comment