The RCA RCR504BE is a versatile 4-device universal remote designed to control the core components of your entertainment system, such as your TV, DVD/Blu-ray player, VCR, and satellite or cable box. This guide provides the specific codes and simple, step-by-step instructions you need to program your RCR504BE remote quickly.
RCA RCR504BE Remote Codes List
Find your device’s brand in the list below. Start with the first code. If it doesn’t work, try the next one on the list until your device responds.
Programming Your RCA RCR504BE Universal Remote
Method 1: Direct Code Entry (Recommended)
- Turn on your device (e.g., TV, DVD player).
- Press and hold the corresponding device button on the remote (TV, DVD, VCR, CBL/SAT).
- While holding the device button, press and hold the POWER button until the indicator light turns on. Release both buttons. The light will remain on.
- Enter the first 5-digit code for your brand from the list above. The indicator light will turn off after the last digit is entered.
- Test the remote. Point it at your device and press POWER. If the device turns off, the programming is complete. If not, repeat the steps using the next code for your brand.
Method 2: Auto Code Search (If Codes Don’t Work)
- Turn on your device.
- Press and hold the device button you want to program.
- While holding it, press and hold the POWER button until the indicator light turns on. Release both.
- Press the PLAY button on the remote. The remote will begin sending codes to your device, and the indicator light will blink.
- Wait for your device to turn off. As soon as it does, immediately press the REVERSE button once to lock in the code.
- Test the remote by powering the device back on and trying other functions.
Troubleshooting Common Issues with RCA RCR504BE Remote
- Indicator light blinks but device doesn’t respond? This usually means you’ve entered an incorrect code. Try the next code on the list or use the Auto Code Search.
- Remote not working at all? Ensure your batteries are fresh and inserted correctly. Make sure there’s a clear line of sight to your device’s sensor.
- Only some buttons work? The remote has found a partial match. You will need to repeat the Auto Code Search and wait for the device to turn off a second time before locking in the code.
Frequently Asked Questions (FAQs) about RCA RCR504BE Remote
The RCR504BE is a 4-device remote, designed to control a TV, a DVD or Blu-ray player, a VCR, and a satellite or cable box.
While it has four dedicated device buttons (TV, DVD, VCR, SAT), you can often program one of these buttons (like VCR or DVD) to control an audio device. You will need to find the correct codes for your soundbar brand and use that device slot.
If your brand is not listed, the Auto Code Search (Method 2 above) is your best option. It will scan through all available codes until it finds a match for your device.
Conclusion
You now have all the tools needed to program your RCA RCR504BE universal remote. Whether you used the direct code entry for a quick setup or the auto code search for a tricky device, your 4-device remote should now be in full control of your entertainment system. Enjoy the convenience and simplicity of managing your TV, DVD player, VCR, and cable box with a single, reliable remote.
Add Comment