People who are Magnavox loyalists must be having various electrical equipments from the brand such as a Magnavox TV, sound bar, DVD player, or even a Magnavox VCR. In such a case, the cluster of remotes on your drawing table must seem to perplex you, your kids, or your guests when they come over, right?
In such a case, the only real solution is to go with a minimalistic approach and buy a universal remote. If you already have invested in one, then you must be looking for RCA universal remote codes for Magnavox so that you can program your remote and simplify matters for yourself.
There are unique codes specially created to program a universal remote. These are separate for each device. So, if you are looking to program Magnavox TV for RCA remote then you must look at the back of your Magnavox TV casing. You will find multiple codes that you will need to enter one by one into your RCA remote.
If you cannot see the back of your television or the box it came in for some reason, you can find the same online or in the manual that comes along.
Just like the Magnavox TV codes, there is a separate set of codes that one needs to enter to program the RCA universal remote for controlling the Magnavox DVD player. These 4-digit codes need to be entered one after the other following a particular sequence of steps. You can find the steps to program an RCA remote for a DVD player mentioned further below in the article.
These are the RCA universal remote codes for controlling the Magnavox DVD player are mainly a 4-digit number that comes in the manual or can be found on the box.
Thanks to advanced technology, one will have no hassles programming even a DVD/VCR combo as there are codes for everything. These unique sets of codes are specially designed for the Magnavox brand and need to be entered through the universal remote to program it and make it ready to give instructions to your DVD/VCR combo. The codes for DVD/VCR combo are quite different from the codes to set up RCA remote for Magnavox TV.
If one is looking to program their RCA remote for a DVD player then the Magnavox TV codes for RCA universal remotes do not apply. You need to program your RCA universal remote with the codes for the Magnavox DVD player that are mentioned above.
- Place fresh batteries in the RCA universal remote.
- Switch on the Magnavox TV set.
- You need to press and hold the TV and SEL buttons simultaneously for 3 seconds. This will make the button light up.
- While the button is lit, point the universal remote towards the TV and enter the 3, 4, or 5-digit codes.
- Verify the code by clicking on the volume + button. It will increase the TV volume.
- Finally, press the TV button to store the 3, 4, or 5-digit code. If the button blinks twice, it means that the code has been stored.
Here are the steps that need to be taken in the given order so that you can program your RCA remote to your DVD player. Following this step-by-step process will easily help you manage your sync process, easily.