Roku is an American hardware digital media that manufactures a wide range of electronic devices to keep you entertained. They offer you to access online streaming services for your entertainment. Usually, all the electronic devices of Roku come with remote control, but in case you have lost the remote for any of the devices or if you are tired to handle dozens of remotes, then RCA universal remote is the best remote to control all your Roku devices in one go.
RCA universal remote control can be paired up easily with your Roku devices like TV unit, DVD player, Blu Ray, streaming stick, or any other. To program Roku devices with RCA universal remote, you need to have a code that will be required to enter on the remote to operate the device. These codes vary for different devices, you must find the correct code for each device to pair it with the RCA remote.
RCA Universal Remote Roku Code List
There are several codes for every electronic device of Roku and these codes vary in digits as well. You can find the codes with one, two, three, four, and five digits that go with different devices and their different models. The code list of Roku devices can be found on the user manual that has come along with the RCA universal remote control you can even check them here on the table given below or else you can find them online. We are providing you with the RCA universal remote codes which can program most of the Roku devices.
RCA Universal Remote Codes For Roku 5 Digit
Some Roku devices require 5 digits code to be paired up with RCA universal remote control. You just need to enter the code on the RCA remote and control all the functions of the device with it. Here is a list of 5 digits Roku codes and rc122 remote codes for tcl tv provided here, you check them and mark them to use them to operate your Roku device with RCA universal remote control.
RCA Universal Remote Codes for Roku Streaming Stick
Streaming Stick is the new favorite among TV buffs. This tiny media player can be plugged directly into an HDMI port and let you binge-watch shows and movies. Just like other devices Roku’s streaming stick can also be programmed with the RCA universal remote control and we can apply same for program rca remote to dynex tv as well. It requires a code to be programmed with RCA universal remote that you check on the list given below and enjoy your show.
How to Program RCA Universal Remote to Roku
It’s very easy to program RCA universal remote control to your Roku devices by following a simple method. But directly jumping on to method, first check the batteries of the remote, whether they are working or not. Check these steps to operate your Roku device with RCA remote:
- Turn on your smart device like (TV, DVD, CBL, and OK/SEL) that you want to operate with the RCA remote.
- Now turn on the remote, and click the device button (TV, DVD, CBL, and OK/SEL) for 3 seconds.
- Click on CH+ & CH- button while pointing the remote towards the device. The Remote will show on/off signals. Press the up or down key continuously until the device turns off.
- Now verify the code by clicking on the power key. Now the device will turn on. If it starts, try changing the channel to verify that the remote is programmed correctly.
- Now tap the device button to save the code. At this moment the LED of the Device will blink twice for confirming the code stored.
Roku is quite a popular brand in America that offers a variety of entertainment devices. As mentioned above, RCA universal remote control can program all the devices of Roku and keeps you stress-free from managing dozens of remotes at home. The codes mentioned here are all verified, so you can use them without any issue. Hope this article helped you to program your Roku devices with RCA universal remote and iff you have rca universal remote codes for onn tv it wil works too, and if still there is some doubt, then feel free to seek help from RCA customer service.